We can capture handshake by sending deauthentication packets to client connected to Wi-Fi. If anyone is not connected the Wi-Fi, cracking is not possible as we need a wpa handshake. After that we should see that if any one is connected to the victim Wi-Fi. Wi-Fi transmits signal in the form of packets in air so we need to capture all the packets in air so we use airodump to dump all the packets in air. In most cases, you only need to do this once to pair them. Encryption or security on which device is working on. To AirPlay from your Mac to an AppleTV, follow these steps: Step 1: Make sure both devices are connected to the same Wi-Fi network. The MAC address of the radio interface the client device is currently connected to. The channel number where wireless networks can send and receive data. Notice: OS X 10.15 and above are not available.
If your wireless card is not able to do this, you need to get an external wireless card which is capable of monitor/injection mode.Īpart from these tools, you need to have a word-list to crack the password from the captured packets.įirst you need to understand how Wi-Fi works. After you will found your network press ctrl+c to exit. Screen Mirroring Screen Recording Movies, Photos and Music Streaming. To crack Wi-Fi, first, you need a computer with kali linux and a wireless card which supports monitor/injection mode. To do this, first you should install kalinux or you can use live kali linux.
In this tutorial I will tell you how to crack wpa/wpa2 wi-fi in kali linux using aircrack-ng.
